CHARACTERISTICS

WAVE fin design and V-shaped fin design for GPU cooling. The WAVE fin design reduces friction when wind enters the fin module, resulting in reduced wind shear noise. The V-shaped fin design on top of the GPU accelerates and centralizes the airflow around the GPU to dissipate heat efficiently.

Cold rolled steel frame. Experience a superior and beautifully designed frame on the NITRO+ graphics card AMD RadeonTM RX 7700 XT with a cold-rolled steel frame that strengthens cover structure and durability while coating the sides of the PCB for a rugged coating along with the all-metal backboard.

Digital power design. OTHER, OF A THICKNESS OF AMD The RadeonTM RX 7000 Series is designed with digital power that provides precise energy control and excellent energy efficiency.

 Copper PCBs with high TG.The GPU is mounted on a 2-oz, 14-layer, high-density, high-Tg copper PCB to match the fast speed, high current and higher power requirement of the GPU and memory to ensure high stability of the PCB during operation.

Rear plate of tough metal. The all-aluminum rear plate provides additional stiffness that ensures nothing bends and dust stays out. It also helps cool your card by increasing heat dissipation.

Dedicated VRM cooling. Dedicated VRM cooling module to create optimal heat dissipation for maximum airflow and cooling performance.

Swing the angular velocity fan. The angular velocity fan blades provide a double layer of downward air pressure which, together with the air pressure in the outer ring of the axial fan, produces up to 44% more downward air pressure and up to 19% more airflow for quieter and cooler operation. compared to previous generations.

Ultra high performance conductive polymer aluminum capacitor. The ultra-high-performance conductive polymer aluminum capacitor has a small PCB footprint but a high volumetric capacitance that makes 14-phase power to the RX 7700 series graphics card possible. The capacitor provides stable capacitance at high frequency and temperature with very low signal noise, which ensures product stability and reliability.

Heatpipe compound optimized. Composite heatpipes are tuned for each individual cooling design with optimal heat flow, distributing heat efficiently and evenly throughout the cooling module.

Fuse protection. To protect your card, SAPPHIRE cards have fuse protection built into the circuit of the external PCI-E power connector to keep components secure.

Control of the assist system fan. When the temperature of the GPU increases, the fans on the graphics card speed up accordingly. To further assist with cooling and heat dissipation, the assist system fan control function in SAPPHIRE's TriXX software controls the speed of a system fan to increase automatically at the same time as the graphics card fans, which helps expel hot air from the entire system. let's move it.

Dual BIOS. What. Choose between primary BIOS mode or secondary mode to enhance your gaming experience.

Graphics card support. It includes a graphics card holder to hold the graphics card in place in the PCIe slot.

The light bar is ARGB. With a sleek cover design augmented with ARGB LED, you can change the LED colors to get a custom design. This can be controlled using the TriXX software. Choose from different modes, including fan speed mode, PCB temperature mode or colored rainbow mode, or turn off the LEDs.

Synchronization with external ARGB control. Enable external RGB LED synchronization between the graphics card and motherboard using the 3-pin header in the tail. Players can then choose whether the graphics card performs the RGB LED effects independently or whether the motherboard takes control.

Quick connection of the fan. If there's a problem with the fan, you don't have to return the whole card. Sapphire or our channel partners will send you a replacement fan directly. That means they're easy to remove, clean and replace, with just a screw that holds them securely in place.

Two ball bearing. What. These have fans with double ball bearings, which have a service life approximately 85% longer than the cuff bearings in our tests. Improvements to the fan blades mean the solution is up to 10% quieter than the previous generation.

SPECIFICATIONS

• GPU

- Graphics card AMD RadeonTM RX 7700 XT

- 5 nm GPU

- Architecture AMD RDNATM 3

- Flow processors 3456

- 54 CU computing units (with RT+AI accelerators)

- 48MB of infinite cache

- Lightning accelerators 54

- Memory/bus size 12 GB/192 bits GDDR6

- Screens Maximum four screens

• Resolution

- HDMITM: 7680×4320

- DisplayPort 2.1: 7680 by 4320

• Interface

- PCI-Express 4.0 by 16

• Production

- 2xHDMI

- Two ports DisplayPort

- Support for UEFI BIOS

- Index of games 1440P

• Characteristics of Sapphire

- Dual BIOS

- TriXX software switch

- Premium digital power design

- Capacitors of ultra high performance conductive polymer aluminium

- Fuse protection

- Tri-X cooling technology

- High Tg copper PCBs

- Heatpipe composite optimized

- Smart control of the fan

- Precision fan control

- Metal back plate with ARGB

- ARGB light bar

- Fans with two ball bearings

- Hand of the angular velocity fan

- Control of the assistance system fan

- Frame made of aluminum alloy.

- Dedicated VRM cooling

- Wavy fin design

- V-shaped fin design for GPU cooling

- Compatible with TriXX

- Checking the fan

- Quick connection of the fan

- TriXX pulse

- It 's nitrous

- External RGB sync with MB LED

• Accessories included

- Graphics card support

- ARGB extension cable

• Characteristics of AMD

- Architecture AMD RDNATM 3

- 54 computing units AMD RDNATM 3

- Technology AMD Infinity CacheTM of 48 MB

- Compatibility with DisplayPortTM 2.1

- Engine AMD Radiance DisplayTM

- 12 GB GDDR6 on 192 bit memory bus

- Prepared for PCI® Express 4.0

- Super-resolution technology AMD FidelityFXTM*

- Final compatibility with Microsoft® DirectX® 12

- Support for Microsoft® DirectStorage

- Vulkan® optimized

- Smart technologies AMD

- Software AMDIt 's called Adrenalin Edition

- Noise suppression AMD

- Privacy view of AMD

- Technology AMD RadeonTM with super resolution

- Link AMD

- Technology AMD FreeSyncTM

• Cooling

- 3 fans

• Form factor

- three slots, ATX

- Dimensions: 320 ((L) x 134.85 ((W) x 61.57 (H) mm

• Energy consumption

- Total power of the 252 W panel

• I KNOW

- Linux®, Windows® 10 and Windows 11. 64 bit operating system required

• System requirements

- Power supply minimum 700 watts

- two eight-pin power connectors.

- A PCI Express® based PC is required with an X16 rail graphics slot available on the motherboard.

- Minimum 8GB of system memory. 16 GB is recommended.