Specifications Xiaomi Redmi Pad SE

- Dimensions

- Height 211.58 mm

- Width 125.48 mm

- 8.8 mm thick*

- Weight ≤373 g

- *Data from Xiaomi's internal laboratories. The measurement methods of the sector can vary and therefore the actual results may differ.

- Processor

- MediaTek Helio G85

- Process of 12 nm, eight cores

- CPU: Arm Cortex-A75 2.0 GHz

- Arm Cortex-A55 of 1.8 GHz

- GPU: Arm Mali-G52 MC2

- Storage and RAM

- 4 GB+64 GB LPDDR4X + EMMC 5.1

- Supports expandable storage: up to 2 TB

- *The available settings may vary according to the region. The available storage and RAM are less than the total memory due to the storage of the operating system and pre-installed software on the device.

- *The MicroSD card is sold separately. Real compatibility with memory cards can vary from one manufacturer to another. External memory can be used to store multimedia files (photos, videos and music), but not applications.

- Screen

- Size: 8.7', aspect ratio of 5:3

- Resolution: 1340 x 800

- Refresh rate: up to 90 Hz

- Brillo: 500 nits (typ); 600 nits (outside mode)

- Material: LCD

- TÜV Rheinland low-blue (software solution) certification

- TÜV Rheinland unparalleled technology certification

- Screen to body ratio: 84.41 %

- Contrast ratio: 1500:1

- Color depth: 10 bits, 1000 million colors

- Attenuation: 2048

- Reading mode

- *The screen size of the Redmi Pad SE 8.7 is about 8.7 inches when measured diagonally. The viewing area is smaller due to curved corners. Measures between individual products can vary. Data obtained from Xiaomi's internal laboratories.

- *The refresh rate can be adjusted up to 90 Hz for compatible applications.

- Audio

- 1 microphone

- Two speakers compatible with Dolby Atmos®

- 3.5 mm headphone connector

- Camera

- Rear camera:8 MPf/2,0, pixel size 1,12 μm

- 1080p 1920 x 1080 30 fps

- 720p 1280 x 720 30 fps

- Front camera: 5 MPf/2,2, pixel size 1,12 μm

- 1080p 1920 x 1080 30 fps

- 720p 1280 x 720 30 fps

- Battery and load

- 6650 mAh (typ) Supports fast loading of 18 W

- * USB type C

- *The 18 W cable charge means the output power of the adapter is 18 W. The actual output power can vary depending on the environment.

- *The box includes a 10 W power adapter. The 18 W load-compatible power adapters are sold separately. It is recommended to use 18 W or higher power adapters compatible with the load with power supply.

- Data transfer

- USB 2.0

- Network and connectivity

- Network bands:

- SIM 1 + SIM 2 + MicroSD2G/3G/4G

- GSM: 2/3/5/8

- WCDMA: B1/2/4/5/6/8/19

- LTE FDD: B1/2/3/4/5/7/8/13/18/19/20/26/28/66(Full table)

- LTE TDD: B38/40/41 (fullband)Wi-Fi 5 double-band (802.11a/b/g/n/ac)Bluetooth 5.3

- AAC SBC LDACFM

- Sensors

- accelerometer Δ Electronic compas Δ Sensor Hall Δ Infrared transmitter Δ Virtual proximity sensor Δ Virtual light sensor

- Operating system

- Xiaomi HyperOS and Android U